![]() The tower controller will consider that pilots of turbine-powered aircraft are ready for takeoff when they reach the runway or warm-up block unless advised otherwise.Pilots are encouraged to monitor the local tower frequency as soon as practical consistent with other ATC requirements.Unless otherwise advised by the tower, remain on that frequency during taxiing and run-up, then change to local control frequency when ready to request takeoff clearance.Pilots of departing aircraft should communicate with the control tower on the appropriate ground control/clearance delivery frequency prior to starting engines to receive engine start time, taxi and/or clearance information.If incorrect, distorted, or incomplete, makes corrections as appropriate.Ensures that readbacks by the pilot of altitude, heading, or other items are correct.Ensures acknowledgment by the pilot for issued information, clearances, or instructions.Assigns altitudes in IFR clearances that are at or above the minimum IFR altitudes in controlled airspace.Issues appropriate clearances for the operation to be conducted, or being conducted, in accordance with established criteria.A landing clearance does not relieve the pilot from compliance with any previously issued altitude crossing restriction Note that a clearance to land means that appropriate separation on the landing runway will be ensured.Advises ATC as soon as possible and obtains an amended clearance, if deviation is necessary Promptly complies with an air traffic clearance upon receipt except as necessary to cope with an emergency. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |